Compass with Holder for 25 mm Ø Handlebar - 10325

Compass with Holder for 25 mm Ø Handlebar
additional images:
Price
 
111,20*
shipping weight: 0.356 kg
* including VAT plus shipping
Quantity:
Total
Unit price
base price
Stock
Delivery Time: 4 Weeks
Description
Compass with Holder for 25 mm Ø, ideal for motorcycles

The compass fits onto all motorcycles with 22 mm, 25 mm and 28 mm tube handle bar.

The compass is of very high quality and offers the advantage that it is adjustable against small external radiation interferences which can be caused by the motorcycle.

Thus, the installation should be arranged as follows:

Set up the motorcycle on the center stand so that it shows to the east or to the west. It will be most accurate, if you take an external compass for adjusting. Place the compass into a horizontal position. Start the engine, and, now, you can see whether desired direction fits with the aligned motorcycle. If it does not fit yet, you can use the included antimagnetic screw driver to adjust the requested value. In case you are driving a lot in the dark, the included cable with the cable connection can be mounted to the parking light cable.

• 2 1/4" Direct Reading Dial with Large Numerals for Easy Reading
• Black with Black Dial, Bracket Mounted
• Strong Directive Force Magnets and Composite Dial for Fast Performance
• Built-in Compensators to Correct for Deviation
• Extra large Diaphragm and Rugged Construction provide extended operating temperature range.
• High-Impact Rubber Accent Strip
• Built-in, 12-Volt Green NiteVu Lighting
• 100% Repairable

Approx. weight: 9 oz (256g)

Replacement Lighting: TR-0050 ASY
Replacement Bracket: TR-0008 BLK

Notes:
Comes standard with 12 volt lighting.

with mounting bracket for horizontal or perpendicular fitting

All MV accessories were assembled and tested at original motorcycles - without foreign modifications.
Additional information
accessories
 
111,20*
shipping weight: 0.356 kg
 
111,20*
shipping weight: 0.356 kg
Question on the item?
Do you have any questions regarding this item?
Your email Adress
My Question:
Please retype the letters shown here
captcha
Description
Additional information
accessories
Question on the item?
Compass with Holder for 25 mm Ø, ideal for motorcycles

The compass fits onto all motorcycles with 22 mm, 25 mm and 28 mm tube handle bar.

The compass is of very high quality and offers the advantage that it is adjustable against small external radiation interferences which can be caused by the motorcycle.

Thus, the installation should be arranged as follows:

Set up the motorcycle on the center stand so that it shows to the east or to the west. It will be most accurate, if you take an external compass for adjusting. Place the compass into a horizontal position. Start the engine, and, now, you can see whether desired direction fits with the aligned motorcycle. If it does not fit yet, you can use the included antimagnetic screw driver to adjust the requested value. In case you are driving a lot in the dark, the included cable with the cable connection can be mounted to the parking light cable.

• 2 1/4" Direct Reading Dial with Large Numerals for Easy Reading
• Black with Black Dial, Bracket Mounted
• Strong Directive Force Magnets and Composite Dial for Fast Performance
• Built-in Compensators to Correct for Deviation
• Extra large Diaphragm and Rugged Construction provide extended operating temperature range.
• High-Impact Rubber Accent Strip
• Built-in, 12-Volt Green NiteVu Lighting
• 100% Repairable

Approx. weight: 9 oz (256g)

Replacement Lighting: TR-0050 ASY
Replacement Bracket: TR-0008 BLK

Notes:
Comes standard with 12 volt lighting.

with mounting bracket for horizontal or perpendicular fitting

All MV accessories were assembled and tested at original motorcycles - without foreign modifications.
 
111,20*
shipping weight: 0.356 kg
 
111,20*
shipping weight: 0.356 kg
Do you have any questions regarding this item?
Your email Adress
My Question:
Please retype the letters shown here
captcha