| Search |
 |
|
|
|
« Back
|
High-Grade Steel Cylinder Protection for R 1200 Boxer Engines up to 2009 - 10159
|
|
|
|
additional images:
|
|
The well know and wide spread original cylinder protectors made from plastic do their job only when your stationary motorcycle falls down or when you go down on soft ground or grass.
Then the expensive plastic protectors are scratched or broken and must be replaced.
When your motorcycle goes down while driving, the protectors made from plastic lose their function completely, failing because of the weight and force of the load or they give-way during the duress of a skid.
In the end, the parts which the expensive plastic protectors are designed to protect are destroyed.
Likewise, the wide-spread cylinder protectors made from round pipe have the following disadvantages.
1. The installation and de-installation is very expensive.
2. After the expensive de-installation, the depressions and sanded off places remain.
3. The motorcycles appearance becomes larges and cumbersome. Tube cylinder protectors strongly change the appearance.
4. The tube cylinder protectors are relatively heavy.
5. The aerodynamics are strongly and negatively affected.
6. The production of these are expensive.
7. For this kind of protection, new installation points need to be added.
8. They are suitable only for the appearance of the Enduro bikes.
The Solution:
A cylinder protector made from 2mm strong, high-grade steel which the fastening points are integrated into the fastening points of the cylinder head cover, designed with large diminsions and a heat-resistant silicon buffer.
Advantages:
1. A rub through is practically impossible.
2. They are fast to install and de-install.
3. Developing scratches or depressions in the high-grade steel sheet metal can be removed with sandpapier and/or with a hammer very easily and fast (without technical or optical depreciation).
4. The appearance of your motorcycle is virturally unaltered.
5. The total weight of the motorcycle is minimally affected.
6. The aerodynamics are not negatively affected.
The cylinder protectors are the steel part shown on the lower half of the cylinder (see photo). The yellow part is not included.
dos not fit on model 2010
16.05.06 kv
|
|
|
|
|
|
|
|
Info |
| |
|
|
 |
 |
|
)
)
