| Search |
 |
|
|
|
|
The New MV Tube Stile Handlebar Adapter for BMW R1200R 2011+ - 90028b
|
|
|
|
additional images:
|
|
The New MV Tube Stile Handlebar Adapter BMW R1200R 2011 with 28 mm
New in the MV Program – The tube handlebar adapters in a new appearance – 50 mm
You can fit the adapter on all motorbikes with 32 - 34 mm boring distance or the 28 mm from 36 - 42 mm boring.
For the BMW R1200R 2011, the adapter does not fit with the original BMW tank bag attached.
The adapter is easily to be attached:
Detach the original handlebar forms. (Please take care that the containers for break and clutch fluid are not tilt!) and attach the lower part of the MV adapter. Now, just put the handlebars into the new adapters and fix it with the handlebar forms included in the adapter set. All necessary screws are provided.
The original brake hose will be installed upside down and the fixing nose at the main brake cylinder will be cut ... and ready!
Generally, it is sufficient to run all hoses and wires behind the fork brace. Eventually, for some bikes the wires have to be replaced by longer ones. In case of questions, please feel free to contact us either by phone under 0049 (0) 21 62 – 32 5 64 or by mail to mail@verholen.de.
For the BMW R1200R 2011 a brake line extension is requested. It is included in the scope of supply.
Generally, the adapter fits to all other bikes with a 22 mm, 25 mm or 28 mm handlebar with a hole spacing of 32 - 34 mm or 28 mm handlebar with a distance of 36 - 42 mm.
The following applies to Germany consumers only:
The adapter is shipped with TÜV approval. The models which we list have been accepted. For all other models, an individual acceptance can be made. You will need to take your bike in for inspection and approval.
The handlebar adapter can change the view into the mirror. We suggest the AC Schnitzer mirror extension set.
|
| We highly recommend these accessories to go with this item: | |
|
|
|
|
|
|
|
|
|
)
)
)
