The MV tube handlebar adapters in a new appearance – 50 mm for MotoGuzzi V100 Mandello and Stelvio model year 2024 silver anodised

The new tube handlebar adapter for all 28 mm handlebars improves your seating position by optimal 50 mm. A play of 50 mm for closer or 25 mm higher of the handlebaris possible.

This results in a natural ergonomic and a healthier sitting position.

You will feel a noticeable advantage: No more tensed up and widely outstretched arm. You sit perfectly comfortable on your bike.

The basic adapter is mounted with M8 screws and has a long hole with a dual-spacing of 36 mm - 42 mm.

The adapter can easily be attached:
Detach the original handlebar forms. (Please take care the containers for break and clutch fluid are not tilt!) and attach the lower part of the MV adapter. Now, just put the handlebars into the new adapters and fix it with the handlebar forms included in the adapter set. All necessary screws are provided.

Generally, it is sufficient to run all hoses and wires behind the fork brace. Eventually, for some bikes the wires have to be replaced by longer ones. In case of questions, please feel free to contact us.

Generally, the adapter fits to all other bikes with a 28 mm handlebar with a hole center distance of a distance of 36 - 42 mm.

All MV accessories were assembled and tested at original motorcycles - without foreign modifications.